How an optical grain sorter works
Updated November 17, 2026
An optical sorter spreads grain into a thin falling stream, photographs every kernel with high-speed cameras, and fires a short jet of compressed air at each kernel the software flags as defective. Good product continues; rejects are blown into a separate chute.
The four steps inside a sorter
| Step | What happens |
|---|---|
| 1. Feeding | A vibrating feeder spreads grain evenly across channels (chutes). |
| 2. Detection | Cameras on one or both sides capture each kernel in colour, and sometimes infrared or shape. |
| 3. Decision | Software compares each kernel with the accept and reject settings in milliseconds. |
| 4. Ejection | Fast air valves blow rejected kernels out of the stream. |
What affects accuracy
- Clean, dust-free product (clean before sorting)
- Even feed: not too thick, not too thin
- Calibrated product size
- Lighting and camera cleanliness
- Settings tuned to your own product and buyer sample
Throughput versus purity
Pushing more product through each channel raises throughput but lowers accuracy and increases good kernels in the reject. For high-value pulses and food-grade soybeans, a second pass on the rejects (re-sort) recovers good product.
Compressed air matters
Ejectors need a steady supply of clean, dry compressed air. An undersized compressor or wet air reduces ejection accuracy, especially at full load.


