Serving AB · SK · MB · ON · QC and all of Canada (450) 300-4030Français
ProductsTruck probes and grain samplersGrain cleanersGrain augers and bin sweepsGrain analysis equipmentDust controlGrain dryersOptical color sortersGrain processing plants (Alapala)Grain moisture testersGrain bin monitoring systemsCorn dryersSeed cleanersServicesCropsBlogContactFrançaisRequest a quote

Milestock / Blog

Blog

Grain bin entry: the risks and how to avoid going in

Updated November 17, 2026

Flowing grain can bury a person in seconds, and a crusted grain surface can collapse without warning. The safest approach is to avoid bin entry: keep grain in condition so it flows, and use sweep augers and monitoring instead of people inside the bin.

Why people end up in bins

  • Grain is out of condition, crusted or caked and stops flowing
  • Breaking up bridged grain or clumps
  • Cleaning out the last grain on the floor
  • Checking grain condition by hand

How to remove the reasons

ReasonAlternative
Grain out of conditionStore clean and dry grain; aerate; monitor temperature
Floor clean-outSweep auger operated from outside
Checking conditionTemperature and moisture cables

If entry cannot be avoided

  • Lock out all unloading and sweep equipment
  • Never enter alone; use a harness and lifeline with an attendant outside
  • Test the air for oxygen and gases
  • Never walk on crusted grain

Related equipment

Grain augers and bin sweeps
Storage

Grain augers and bin sweeps

Unloading and sweep augers move grain out of bins and silos, including the last grain on the floor that gravity cannot reach.

Storage

Grain bin monitoring systems

A grain bin monitoring system uses temperature and moisture cables, level sensors and fan controls to show the condition of stored grain in real time, so hot spots are caught before the grain spoils.